Quiet, efficient air conditioning for bedrooms, home offices, loft conversions and flats, sized for the room and installed by REFCOM-registered engineers. Most single-room systems are fitted in a day.
Fill out the form below, and a UK Aircon team member will get back to you as soon as possible.
100% Privacy Guaranteed
20+ Years Experience
Free Quote
Expert Installers
REFCOM Registered
Nationwide Installers
On this page
Most British homes were built to hold on to heat. In summer that works against you. Loft rooms under slate roofs, south-facing bedrooms and well-insulated new builds can stay uncomfortably warm long after the sun goes down. A properly designed split system deals with it, and because it is an air-to-air heat pump, you also get an efficient source of heat for the rest of the year.
UK Aircon installs domestic air conditioning across the UK from our base in Newcastle. Below we go through how we pick a system for your home and deal with sizing and noise, then what happens on the day and what drives the price.
Matching the system to the room
The right system for a home depends on which rooms you want to treat and how you use them. These are the situations we come across most.
Bedrooms
A bad install is most obvious when you're trying to sleep. We position the indoor unit so it doesn't blow air straight across the bed, pick models with a low-noise night mode, and route the condensate drain so nothing gurgles at 2am. For one bedroom a wall-mounted split is usually the simplest answer, while a multi-split system suits two or three bedrooms sharing one outdoor unit.
Home offices
Put a computer, a couple of monitors and a person in a small room for eight hours and the heat builds steadily. A compact split holds the temperature through the working day without the racket of a portable unit, and a wall-mounted air conditioning unit placed above the door or opposite the desk avoids blowing air straight at you.
Loft conversions
Rooms directly under the roof warm up fast, through the rooflights and the roof itself. We can often run the pipes through eaves storage, so very little pipework is on show. If there's a suitable void, a small ducted unit is another option.
Flats and leasehold properties
Leaseholders usually need written permission from the freeholder or managing agent before fixing an outdoor unit to an external wall, and some buildings restrict where condenser units can go. We can provide the technical details your landlord will ask for, including unit dimensions and the proposed position. Get that consent in writing before you book an installation date.
Rented homes
Tenants need the landlord's consent before any fixed installation. Landlords adding air conditioning to a let property should keep the commissioning paperwork and arrange annual servicing, which also keeps the warranty valid.
A domestic air conditioning outdoor unit on a ground stand beside a house, with an isolator switch on the wall. UK Aircon installs, services and repairs air conditioning in Newcastle.
What size air conditioner does a UK room need?
Domestic split systems are rated in kilowatts (kW) of cooling capacity, and getting the size right matters more than the brand. Too small and the unit runs flat out without ever quite catching up. Too big and it keeps switching on and off, which wastes energy and takes less moisture out of the air. As a rough guide:
Nominal capacity
Typical use in a UK home
2.0kW
Small bedroom or box-room office
2.5kW
Average double bedroom or study
3.5kW
Larger bedroom, loft room or modest living room
5.0kW
Open-plan living and dining space
7.0kW
Large open-plan areas or rooms with extensive glazing
These figures are a starting point only. During the free survey we account for floor area, ceiling height, window size and orientation, insulation and the number of people and appliances in the room. For background reading, see what size air conditioning unit you need.
Keeping noise down, inside and out
On low fan speed a modern wall-mounted indoor unit is quiet, about the level of a soft background hum. The outdoor unit needs more thought, especially in terraced streets (the kind we often see when quoting for air conditioning in Jesmond) where gardens sit close to the neighbours. Where we can, we keep it away from bedroom windows, put it on anti-vibration mounts (brackets or ground stand) and stay out of enclosed corners that bounce sound back. If an outdoor unit has to go near a boundary, we'll talk it through with you before the install.
External units can also raise planning questions. The rules depend on the property and where it is, and listed buildings, conservation areas and prominent front elevations need extra care. As air conditioning specialists in Newcastle and beyond, we check with the local planning authority where it applies.
Using it for heating in winter
A reverse-cycle split is a heat pump. In winter it pulls heat out of the outdoor air and brings it inside, typically producing several units of heat for every unit of electricity it uses. So it's a practical way to heat a conservatory, garden room or loft conversion, or any room the central heating never quite reaches. Quite a few of our customers end up using heating mode more than cooling, and our guide to what air conditioning costs to run explains what that means for your bills.
Installation day, step by step
We usually fit a single wall-mounted split in one day. A multi-split can take longer, depending on how many rooms are involved. A typical day runs like this:
Arrival and protection. The engineers confirm unit positions with you and lay dust sheets.
Mounting the indoor unit. The backplate is fixed level and a core hole of around 65mm is drilled for pipework, cable and condensate drain.
Siting the outdoor unit. It goes on wall brackets or a ground stand, on anti-vibration mounts.
Pipework and drainage. Insulated refrigerant pipes are run and connected, trunking is fitted where pipes are visible, and the condensate drain is set to fall correctly.
Pressure test and vacuum. The pipework is tested with nitrogen for leaks, then evacuated under vacuum before the refrigerant is released.
Electrical connection and commissioning. The system is powered, tested in cooling and heating, and readings are recorded.
Handover. We show you the remote or app controls, filter cleaning and the settings that keep running costs down.
What affects the cost of home air conditioning?
Our domestic installations start from £1,800 installed. The price rises or falls with:
Number of indoor units
Cooling capacity in kW
Single split or multi-split
Length of pipe run
Wall construction and access
Height of the outdoor unit
Trunking or concealed pipework
Electrical supply work
We always survey before we quote, and the survey is free, so the number you get is based on your house and not a generic estimate.
Aftercare once the system is running
When the system is getting heavy use, clean the indoor unit filters every few weeks. It takes a few minutes and keeps airflow and efficiency up. Book an annual service so the coils, drain and refrigerant circuit are checked. Your installation is covered by our 5-year warranty on parts and labour, which includes access to 24-hour emergency call-out, complimentary maintenance check-ups and discounted spares. If something does go wrong, our maintenance and repair team can help, whoever made the unit. You can see everything else we offer on our services overview.
Home air conditioning: common questions
How long does it take to install air conditioning in a house?
A single wall-mounted split system is usually installed in one day. Multi-split systems serving several rooms can take longer, depending on pipe routes and access.
Do I need permission to install air conditioning in a flat?
Leaseholders normally need written consent from the freeholder or managing agent to fix an outdoor unit to the building. Planning permission or listed building consent may also apply depending on the property and location.
Is home air conditioning noisy at night?
A correctly sized wall-mounted unit is quiet on low fan speed, and most models offer a night mode. Positioning the outdoor unit away from bedroom windows and using anti-vibration mounts keeps outdoor noise down.
What kW rating suits a typical UK bedroom?
Most UK bedrooms suit a 2.0kW to 3.5kW split system. The exact size depends on floor area, ceiling height, windows, orientation and insulation, which we assess during a free survey.
Can domestic air conditioning replace my radiators?
A reverse-cycle split heats efficiently and can be the main heat source for individual rooms such as conservatories, garden rooms and loft conversions. Whether it can replace whole-house heating depends on the property and needs assessing on site.
Simple process
How To Get Started
From first call to a cooler home or workplace in three easy steps.
Request a Quote
Call us or fill out our “Get a Free Instant Quote” form to request a quote for your AC service and tell us more about your project.
Discuss Your Project
We’ll answer within 24 hours to discuss your project and make an appointment to get your FREE estimate.
Get Your Job Done
After receiving a quote, you can choose a schedule to book the air conditioning service according to your needs.
A homeowner's guide to air conditioning in UK houses and flats: whether it is worth having, which system suits which property, how to estimate running costs and how to get the most comfort from every kilowatt-hour.
Air conditioning in the UK is sized in kilowatts, and floor area is only the start. Use these rules of thumb to get a ballpark figure, then let a heat-load survey decide.